实测海浪水压场特性分析

海浪水压场是舰船水压场的主要背景干扰.为深入研究海浪水压场与舰船水压场的特征区别,在大量实测海浪水压场数据的基础上,对其时域及频域特性进行研究,并对海浪水压场的平稳性进行了检验,结果表明,海浪水压场能量主要集中在低频范围,且随着海况和水深的增加,最大能谱频率向低频方向移动,在较短的时间内,可将海浪水压场视为平稳随机过程.     

气缸张开式尾翼弹气缸压力数值仿真研究

为研究气缸张开式尾翼工作原理,分析某型滑膛反坦克炮榴弹气缸充放气过程,建立尾翼弹在炮膛内的气缸压力模型,将其与炮弹底部气体压力、密度、温度等参量的变化规律相耦合,并对气缸压力模型进行可解性分析,得到一种求解气缸气体压力、密度等参数随时间变化的数值方法．     

内腐蚀缺陷尺寸对DN150承插管线承压能力的影响

为了科学地指导DN150承插管线的使用与管理,采用非线性有限元法对带内腐蚀缺陷的DN150承插管线进行了剩余强度的评估。通过分析和计算,研究了腐蚀缺陷宽度、长度和深度对管线极限承载能力的影响。结果表明：腐蚀缺陷宽度对DN150承插管线的承载能力影响很小,可忽略不计;随着腐蚀缺陷长度的增加,管线的承载能力略微减小,当缺陷长度达到150mm,管道失效压力基本不变;随着腐蚀缺陷深度的增加,管道失效压力呈线性递减,其对管道失效压力的影响程度远远大于腐蚀缺陷长度。     

甲B类液体全压力储罐消防设计问题研究

对沸点低于45℃的甲B类液体全压力储罐消防设计、审查过程中存在的问题进行了较为全面的分析,并针对这些问题提出了解决的方法,为进一步完善相关工程设计规范和有效地执行这些规范提供了实例,以期给同类工程提供有益借鉴.     

The properties of Sn–Zn–Al–La fusible alloy for mitigation devices of solid propellant rocket motors

The Al and La elements are added to the Sn9Zn alloy to obtain the fusible alloy for the mitigation devices of solid propellant rocket motors. Differential scanning calorimetry (DSC), metallographic analysis, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), tensile testing and fracture analysis were used to study the effect of Al and La elements on the microstructure, melting characteristics, and mechanical properties of the Sn9Zn alloy. Whether the fusible diaphragm can effectively relieve pressure was investigated by the hydrostatic pressure at high-temperature test. Experimental results show that the melting point of the Sn9Zn-0.8Al0·2La and Sn9Zn–3Al0·2La fusible alloys can meet the predetermined working temperature of ventilation. The mechanical properties of those are more than 35% higher than that of the Sn9Zn alloy at −50 °C–70 °C, and the mechanical strength is reduced by 80% at 175 °C. It is proven by the hydrostatic pressure at high-temperature test that the fusible diaphragm can relieve pressure effectively and can be used for the design of the mitigation devices of solid propellant rocket motors.     

Experimental study on the cavity evolution and liquid spurt of hydrodynamic ram

In research of the characteristics of the cavity evolution, the pressure, and the liquid spurt in hydrodynamic ram, the experiment of the high-velocity fragment impacting the water-filled container had been conducted. The relationships between the above three characteristics have been researched. The evolution of the cavity can be divided into three processes according to its shape characteristics. The first liquid spurt occurred in Process Ⅱ and the rest of it occurred in Process Ⅲ. The duration of the second liquid spurt is longer than the first liquid spurt. When the impact velocity of the fragment is less than 996 m/s, the velocity of the second liquid spurt is the highest. When the velocity of the fragment is greater than 996 m/s, the velocity of the first liquid spurt is the highest. The maximum velocities of the first and second liquid spurt are 111 m/s and 94 m/s respectively. The pressure fluctuated sharply in Processes Ⅰ and Ⅲ. The maximum peak pressures in the shock and the cavity oscillation phases are 15.51 MPa and 7.96 MPa respectively. The time interval of the two adjacent pressure pulses increases with the increase of the fragment velocity.     

高亚声速时叶尖小翼对压气机叶栅泄漏流动的影响

为了探索跨声速来流条件时,不同安装位置、不同宽度的叶尖小翼对压气机叶栅气动特性的影响,对Ma=0.8时包括原型叶栅在内的7种扩压叶栅的流场进行了数值研究.结果表明:在多种因素的共同影响下,不同来流冲角的吸力面叶尖小翼在流场中都为负效果,增加了流场复杂性;压力面叶尖小翼则改善了泄漏流动,减小了流动损失.两种安装位置的叶尖...     

在分离式Hopkinson拉杆实验中确定临界实验条件的经验方法

在分离式Hopkinson拉杆实验中,常常需要获得试样在经历一个拉力脉冲拉断情况下的最低应变率,而在分离式Hopkinson拉杆装置中确定对应最低应变率的发射压力需要进行多次尝试性实验。为了更好地解决这一问题,提出一种简单的经验方法,可以通过一次拉断的实验结果计算出一个拉力脉冲拉断试样需要的最小发射压力及相应的应变率,进一步可以预测不同发射压力下的应变率。对4种铝合金试样进行拉伸实验,结果表明,利用提出的经验方法得到的应变率结果与实验结果吻合较好,可以有效地对发射压力和实验应变率进行预估。     

亚临界航速时双船水压场数值计算与实验研究

基于RANS方程,采用VOF方法,选用SST湍流模式,对两艘不同排水量Wigley船同向航行时的水压场进行了数值计算,并开展了双船水压场的实验研究,计算结果与实验结果吻合良好。研究表明:双船在浅水中航行时,由于两船及其引起的兴波相互作用,双船水压场负压峰值和负压延时等特征与两船相对位置密切相关,与单船水压场特征有明显区别。     

延安新区压实Q_2黄土增减湿高压压缩变形特性

为研究压实Q2黄土在高压力条件下的增减湿高压压缩变形特性,采用DGD系列型高压固结仪分别对不同初始压实度和不同初始含水率条件下的压实Q2黄土试样进行高压压缩试验,分析压实Q2黄土压缩变形特性随初始压实度和初始含水率的变化规律;运用不同方法对压缩试验成果进行整理,分析侧限条件下压实Q2黄土应力应变关系特点。结果表明:压实Q2黄土的压缩变形特性受初始压实度和初始含水率的影响较大,在最大压实度和最优含水率处的压缩变形量最小;初始压实度不同,拟合压实Q2黄土应力应变关系曲线的函数也不同,在较低初始压实度条件下,用双曲线拟合效果较好,此时割线模量与应力呈线性关系,在较高初始压实度条件下,用幂函数拟合效果更好。